Chemsultants International · Our Sister Company
Adhesive and Tape Testing Services
Not every lab needs to own every instrument. When you need peel, tack, shear or release data for one project, a feasibility study or a quality problem, our sister company Chemsultants International can run the test for you in its adhesive testing laboratory in Mentor, Ohio.
ChemInstruments builds the testing instruments. Chemsultants puts that kind of testing to work as a service, so you get answers before you commit budget or staff time.
When outsourced testing makes sense
Send samples instead of buying a tester
Before you buy an instrument
Get real data on your own material first. It confirms which test method matters and which instrument your lab should eventually own.
When a product is failing
Lifting labels, tape that will not unwind cleanly, adhesive that softens in heat. Mechanical and analytical testing helps find the cause quickly and cost-effectively.
When the method is not in-house
Accelerated aging, environmental conditioning, surface energy or FT-IR analysis are rarely worth equipping for if you only need them a few times a year.
What Chemsultants tests
Physical and analytical testing for adhesive products
Properties measured
- Peel adhesion and release
- Seam seal adhesion and T-peel
- Tack: loop, probe, rolling ball and quick stick
- Static and dynamic shear, and SAFT up to 205°C / 400°F
- Coefficient of friction, WVTR, surface energy and abrasion resistance
- Tensile and elongation, tear resistance, caliper and coat weight
- Viscosity of hot melt and room-temperature adhesives
- Accelerated aging and weathering (QUV), with conditioning from −40°C up to 50°C at 90% RH
Materials tested
- Pressure-sensitive tapes and labels
- Thermoplastic and thermoset adhesives
- Coatings and release systems
- Paper and film liners and face stocks
- Converted products
Analytical testing
FT-IR identifies the basic chemistry of an adhesive and its key components. It is also used to find contaminants and track crosslinking levels.
Standards
Which test methods does Chemsultants run?
Testing follows the PSTC, ASTM, FINAT and ISO methods that tape and label labs already specify. Examples include PSTC-101 peel adhesion, PSTC-107 shear adhesion, ASTM D3330 peel adhesion, ASTM D3654 static shear, ASTM D6195 loop tack, FINAT FTM 9 loop tack and ISO 29862 peel adhesion. The full method list is on the Chemsultants adhesive testing page.
Need adhesive test data?
Chemsultants handles testing enquiries directly. See the full list of methods, or send them your samples and requirements.