Chemsultants International · Our Sister Company
Pilot Coating Services: From Lab Drawdown to Roll-to-Roll
ChemInstruments equipment works at laboratory scale: drawdown coaters, lab coaters and laminators that make test samples. Production lines run at full commercial scale. Our sister company Chemsultants International covers the step in between, coating your adhesive or topcoat on pilot-scale lines so you can prove a product before committing a production run.
Where pilot coating fits
Three scales of coating
1. Lab scale
Hand and machine drawdowns on a ChemInstruments lab coater or hot melt coater laminator to screen formulations and make test specimens.
2. Pilot scale
Roll-to-roll coating at Chemsultants on webs from 4 to 24 inches wide. It shows how the coating behaves on a real line and produces enough material for prototypes and customer trials.
3. Production
Pilot results tell you whether the product is reproducible and commercially viable before it moves to your production line or to contract coating.
Capabilities
Solvent, emulsion and water-based pilot lines
Solvent and emulsion pilot line
- Web widths from 4 to 24 inches
- Release liners, paper, film, foil and textiles
- Knife-over-roll, direct and reverse gravure, offset gravure and Meyer rod coating
- Three-zone, 30 ft air-flotation ovens up to 400°F (or your substrate’s softening point)
- Line speeds from 5 to 95 ft/min in a white-room environment
- Coating thickness held to ±10%, depending on method and raw materials
Water-based gravure coater
A second line focused on water-based gravure coating, with the same 4 to 24 inch web widths, air-flotation drying and white-room environment.
Supporting services
- Offline corona treating up to 14 inches wide
- Laminating and delaminating
- Viscosity measurement and solid percentage check
- ISO 9001:2015 quality management system
Common questions
About pilot coating
What is the difference between toll coating and custom coating?
Toll coating means Chemsultants applies a coating you developed to the film or substrate you specify. Custom coating means they apply an adhesive or topcoat to your substrate. Both are available, along with combinations of the two.
Can solvent-based adhesives be pilot coated safely?
Yes. The solvent line exhausts through a Regenerative Thermal Oxidizer (RTO) that destroys up to 99% of volatile organic compounds, hazardous air pollutants and odors. You can trial solvent systems without handling the emissions yourself.
Who helps with the formulation?
Chemsultants’ chemists and engineers support adhesive selection, formulation development and rheology modification. See product development for more.
Ready to scale up a coating?
Chemsultants handles pilot coating enquiries directly. See the full line specifications, or tell them what you need to coat.