Chemsultants Slitting & Converting

Chemsultants International · Our Sister Company

Slitting and Converting Services for Coated Materials

A coated master roll is not a product until it is cut to the widths and formats your customers use. Our sister company Chemsultants International slits and converts pilot and short-run material into prototypes ready for market testing, on equipment that handles webs up to 45 inches wide.

Chemsultants technician operating a slitting and converting machine

Lab samples vs. finished rolls

Cutting at the right scale

In your lab

ChemInstruments cutting tools, such as the Specimen Tape Cutters and Rotary Die Slitter, cut test specimens to the exact widths that peel, shear and tack methods require.

At Chemsultants

When you need full rolls in market-ready widths, Chemsultants slits material down to 1 inch on 3 inch cores, and converts narrow web down to 0.5 inch.

Equipment

Three slitters for different jobs

Dusenbery 45″ slitter

Integral 45″ unwind with automatic edge guiding, 18–20″ rewind diameter, and four-zone tension control to run up to four slit widths at once.

Dusenbery 32″ slitter

32″ web width with single differential rewind tension control, 18″ rewind diameter and footage counting.

Siat 12″ narrow web slitter

High-speed narrow web converting with razor, score knife, rotary shear and rotary die slitting, a twin-turret rewind and interchangeable 1″ and 3″ cores.

Materials slit successfully include paper, film, adhesive-backed laminates, nonwovens, wovens and other coated and uncoated web stocks. Inline corona treating up to 14 inches is also available.

Common questions

Which slitting method suits my material?

Razor slitting

The web is pulled past fixed razor blades for a clean, precise cut. It works best on films and thinner materials of even thickness.

Shear slitting

Two rotary knives cut like scissors where their edges meet. It suits paper, foil and heavier-gauge materials.

Crush cutting

The material is pressed between an anvil roll and a cutting roll. It is used mainly for tough materials such as rubber or sandpaper, and also works on some tissue grades, laminates and adhesive materials.

Need material slit or converted?

Chemsultants handles slitting and converting enquiries directly. See the full equipment specifications, or send them your job details.

Learn MoreContact Us