Program Loader
The purpose of this program is to allow customers to reload Hex files onto the various ChemInstruments machines which require them. The need to reload the program is displayed on the face plate of the various machines as either the message “LP” or “Load Program”. If this message is displayed on your machine it requires a Hex file to be loaded onto it so that it can operate. If this message is not displayed DO NOT use this program to connect to your machine unless advised to by a ChemInstruments representative.
- This program requires that you have the proper Hex code to be loaded. To acquire the proper Hex code, please contact ChemInstruments with the model and serial number of the machine.
- If you are using EZ Lab with the machine, please provide the version of EZ Lab you are using.
- This program requires the use of a RS-232 cable. This cable is used to connect from a Windows Computer to the ChemInstruments machine.
Please review the downloadable PROGRAM LOADER HELP SHEET to review the procedure and requirements. If at any time you have questions, please contact ChemInstruments.